[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] AirflowNetwork Zone Mixing Volume [m3] from the concerned zone to adjacent zone.
Hello all,
I/O manual says that output variable: AirflowNetwork Zone Mixing Volume [m3] only gives the volume coming into concerned zone from adjacent zone. How can it be obtained in the opposite direction? I mean how much air is going to other zones from a concerned zone. I/O manual also says that the output is zero if the flow is from the concerned zone to adjacent zone. So, this could be a way to see how the air is moving but its not an easy way if there are many zones.
I cannot use node1 to node2 or similar output variable as there is no distribution system. Here are some highlight inputs of the idf:
MultizoneWithoutDistribution, !- AirflowNetwork Control
SurfaceAverageCalculation, !- Wind Pressure Coefficient Type
LowRise, !- Building Type
Thank you!
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___