[EnergyPlus_Support] Re: P or PI control

["Ooi" <ooi_kb3@xxxxxxxxxxx>]

This was explained last week. The time step integration among the simulation managers is something better than PI, i believe. In PI control, there will be an offset from the setpoint. EP Simulation does not have these offset. It was explained that the offset depends on the proportional band, which is very closely related to gain in the P. 

Hopw this helps.
ooi

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "ohchoen" <ohchoen@...> wrote:
>
> Hi, I'd like to know that it is possible P or PI Control using EP.
> is it possible??
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/