[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Re: repeating of ThermalZone ThermalZone ThermalZone ThermalZone
I am not sure I just figure what I did:
go text editor/ctrl F/type zone,/ copy ThermalZone ThermalZone ThermalZone ThermalZone/ctrl H/past it/ replace all.
Regards,
Junia Compostella
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Pavel Dybskiy <pdybskiy@...> wrote:
>
> I was wondering if there is an intelligent way to specify names of your
> choice to the zones and surfaces other than Ctrl+H in a text editor
>
> -Paul
>
> On Tue, May 22, 2012 at 3:15 PM, CleanTech Analytics <
> jeremiah@...> wrote:
>
> > **
> >
> >
> > Open studio is not a finished toolset, you may wish to use it only for
> > geometry only.
> >
> > Below is a workflow that should allow you to create your model.
> >
> >
> > First, draw out your geomitry in sketchup/openstudio never saving only as
> > open studio .OSM format and not as sketchup .SKP format, then export as
> > IDF.
> >
> > In the IDF editor and name your spaces, save as new filename.
> >
> > Import your new IDF into open studio and open the "inspector" feature.
> >
> > With the inspector check your model space names vs your IDF, if needed
> > update your space names in Open studio.
> >
> > Produce final geometry model from Open Studio in .IDF format.
> >
> > Use IDF editor to create zones from your spaces, copy paste HVAC templates
> > to each zone.
> >
> > Keep in IDF format for further revision in IDF editor.
> >
> >
> > *Jeremiah D. Crossett*
> > *CleanTech Analytics*
> > *503-688-8951*
> > *www.cleantechanalytics.com* <http://www.cleantechanalytics.com>
> >
> >
> > *
> >
> > This document may contain valuable information proprietary to CleanTech
> > Analytics which is private and confidential. It may not be shared, copied,
> > stored or transmitted in any form without the prior written consent of
> > CleanTech Analytics
> > *
> >
> >
> >
> > On Tue, May 22, 2012 at 11:50 AM, juniabuildings <juniabuildings@...
> > > wrote:
> >
> >> **
> >>
> >>
> >>
> >> yes. but no answer so far.
> >> thank you anyway.
> >>
> >>
> >> --- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Linda Lawrie <linda@>
> >> wrote:
> >> >
> >> > Have you tried the OpenStudio forum?
> >> >
> >> > At 12:36 PM 5/22/2012, juniabuildings wrote:
> >> > >hello,
> >> > >
> >> > >I have this problem with OpenStudio. Everytime I close and reopen a
> >> > >file in OpenStudio the name of the Space and Thermal Zone just one
> >> text.Like:
> >> > >
> >> > >ThermalZone 1
> >> > >close file and reopen
> >> > >ThermalZone 1ThermalZone 1
> >> > >close file and reopen
> >> > >ThermalZone 1ThermalZone 1ThermalZone 1
> >> > >close file and reopen
> >> > >ThermalZone 1ThermalZone 1ThermalZone 1ThermalZone 1
> >> > >
> >> > >can someone help plese?
> >> > >
> >> > >thank you,
> >> > >
> >> > >Regards
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >------------------------------------
> >> > >
> >> > >Primary EnergyPlus support is found at:
> >> > >http://energyplus.helpserve.com or send a message to
> >> > >energyplus-support@
> >>
> >> > >
> >> > >The primary EnergyPlus web site is found at:
> >> > >http://www.energyplus.gov
> >> > >
> >> > >The group web site is:
> >> > >http://groups.yahoo.com/group/EnergyPlus_Support/
> >> > >
> >> > >Attachments are currently allowed but be mindful that not everyone
> >> > >has a high speed connection. Limit attachments to small files.
> >> > >
> >> > >EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf
> >> > >under the Documentation link and press the "search" button.
> >> > >Yahoo! Groups Links
> >> > >
> >> > >
> >> > >
> >> >
> >>
> >>
> >
> >
>
>
>
> --
> Best
> -p.d.
>
------------------------------------
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/