Re: [EnergyPlus_Support]

[Linda Lawrie <linda@xxxxxxxxxxxxxx>]

Okay, have you looked at Airflow windows?  I can't
remember if they are mechanically ventilated or not.

Our Airflow network specialist is gone right now -- he will be back next
week.  

You just sent the same message to the group again -- except this time
with a subject?

At 06:29 AM 5/30/2012, Denis Piccoli wrote:

The exterior vented natural cavity model is
for *opaque* surfaces only and does not apply to glazing
systems

2012/5/30 Linda Lawrie <linda@xxxxxxxxxxxxxx>

Have you looked at:

SurfaceProperty:ExteriorNaturalVentedCavity

and that is not suited to your purpose?

At 04:24 AM 5/30/2012, Denis Piccoli wrote:

Hi,we have a project where want to simulate a corridor double skin facades.

The layers of the facade are described below:

Single Exterior Glazing - 110mm air cavity mechanically ventilated with Venetian blinds - double interior glazing.

I model double skin facade as a zone. For each floors I create a zone to represent the ventilated cavity. The width of the zone is 110mm.

Is right to model in this way? Can airflow network simulate mechanical ventilation ???

which algorithm to use for the inner surface of cavity?

__._,_.___

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___