[EnergyPlus_Support] double skin facade

["denispiccoli85" <d.piccoli@xxxxxxxxxxxxxxxxxxxxxx>]

Hi,we have a project where want to simulate a corridor double skin facades. 
The layers of the facade are described below: 
Single Exterior Glazing - 110mm air cavity mechanically ventilated with Venetian blinds - double interior glazing. 
I model double skin facade as a zone. For each floors I create a zone to represent the ventilated cavity. The width of the zone is 110mm. 
Is right to model in this way? Can airflow network simulate mechanical ventilation ???
which algorithm to use for the inner surface of cavity?



------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/