[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Using AirflowNetwork:Distribution model with a Single Zone Residential System





Dear Linda Lawrie,

I just saw them. Thank you very much.

Best Regards,
Simge Andolsun
PhD Candidate
Texas A&M University
College of Architecture


From: Linda Lawrie <linda@xxxxxxxxxxxxxx>
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Sent: Thursday, May 31, 2012 1:17 PM
Subject: Re: [EnergyPlus_Support] Using AirflowNetwork:Distribution model with a Single Zone Residential System

 
Have you looked at the example files that have AirflowNetwork and House in their names?

Two links from the installation:

Example Files Summary Sheet - highlights each example file

Example Files Link to Objects - shows the first three example files (if that many exist) that have a particular object.

At 12:09 PM 5/31/2012, Simge wrote:
Dear EnergyPlus users,

I would like to use the AirflowNetwork:Distribution model with a single zone residential system (DX Cooling and furnace). For this, I used Coil:Cooling:DX:SingleSpeed, Coil:Heating:Gas, AirloopHVAC:Unitary:Furnace:HeatCool and AirTerminal:SingleDuct:Uncontrolled objects of EnergyPlus. When I was entering the AirflowNetwork:Distribution objects, I realized that the only Terminal Unit object type that is allowed in the AirflowNetwork:Distribution model is "AirTerminal:SingleDuct:ConstantVolume:Reheat". I was wondering whether there is any way to use AirflowNetwork:Distribution model with a single zone residential system?

Would you please let me know?

Thanks,
Simge Andolsun
PhD Candidate
Texas A&M University
College of Architecture



------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com/ or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov/

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/




__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___