[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] ReportDuringWarmup

Hello
Where can I find the output relative to ReportDuringWarmup?
I would need to see it, because I have the following 3 severe errors (as you can see, I increased the warmup days up to 500). Despite the errors, the trends of the temperatures seem normal.

** Severe  ** CheckWarmupConvergence: Loads Initialization, Zone="0P%TERRA:PRODUZIONE" did not converge after 500 warmup days.
   **   ~~~   ** See Warmup Convergence Information in .eio file for details
   **   ~~~   ** ...Environment(RunPeriod)="SPINIGARDOLO"
   **   ~~~   ** ..Max Temp Comparison = 6.80E-002 vs Temperature Convergence Tolerance=0.40 - Pass Convergence
   **   ~~~   ** ..Min Temp Comparison = 3.85E-003 vs Temperature Convergence Tolerance=0.40 - Pass Convergence
   **   ~~~   ** ..Max Heat Load Comparison = 5.9379E-002 vs Loads Convergence Tolerance=4.00E-002 - Fail Convergence
   **   ~~~   ** ..Max Cool Load Comparison = 4.2978E-002 vs Loads Convergence Tolerance=4.00E-002 - Fail Convergence

   ** Severe  ** CheckWarmupConvergence: Loads Initialization, Zone="0P%TERRA:MATERIEPRIME" did not converge after 500 warmup days.
   **   ~~~   ** ...Environment(RunPeriod)="SPINIGARDOLO"
   **   ~~~   ** ..Max Temp Comparison = 1.87E-002 vs Temperature Convergence Tolerance=0.40 - Pass Convergence
   **   ~~~   ** ..Min Temp Comparison = 3.77E-002 vs Temperature Convergence Tolerance=0.40 - Pass Convergence
   **   ~~~   ** ..Max Heat Load Comparison = 1.1570E-003 vs Loads Convergence Tolerance=4.00E-002 - Pass Convergence
   **   ~~~   ** ..Max Cool Load Comparison = 0.4406 vs Loads Convergence Tolerance=4.00E-002 - Fail Convergence

   ** Severe  ** CheckWarmupConvergence: Loads Initialization, Zone="1P%PRIMO:MENSA%CUCINA" did not converge after 500 warmup days.
   **   ~~~   ** ...Environment(RunPeriod)="SPINIGARDOLO"
   **   ~~~   ** ..Max Temp Comparison = 1.21 vs Temperature Convergence Tolerance=0.40 - Fail Convergence
   **   ~~~   ** ..Min Temp Comparison = 4.13E-006 vs Temperature Convergence Tolerance=0.40 - Pass Convergence
   **   ~~~   ** ..Max Heat Load Comparison = 2.1992E-002 vs Loads Convergence Tolerance=4.00E-002 - Pass Convergence
   **   ~~~   ** ..Max Cool Load Comparison = 2.5579E-002 vs Loads Convergence Tolerance=4.00E-002 - Pass Convergence





------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/