Hello
Where can I find the output relative to ReportDuringWarmup?
I would need to see it, because I have the following 3 severe errors
(as you can see, I increased the warmup days up to 500). Despite the
errors, the trends of the temperatures seem normal.
** Severe ** CheckWarmupConvergence: Loads Initialization,
Zone="0P%TERRA:PRODUZIONE" did not converge after 500 warmup days.
** ~~~ ** See Warmup Convergence Information in .eio file for
details
** ~~~ ** ...Environment(RunPeriod)="SPINIGARDOLO"
** ~~~ ** ..Max Temp Comparison = 6.80E-002 vs Temperature
Convergence Tolerance=0.40 - Pass Convergence
** ~~~ ** ..Min Temp Comparison = 3.85E-003 vs Temperature
Convergence Tolerance=0.40 - Pass Convergence
** ~~~ ** ..Max Heat Load Comparison = 5.9379E-002 vs Loads
Convergence Tolerance=4.00E-002 - Fail Convergence
** ~~~ ** ..Max Cool Load Comparison = 4.2978E-002 vs Loads
Convergence Tolerance=4.00E-002 - Fail Convergence
** Severe ** CheckWarmupConvergence: Loads Initialization,
Zone="0P%TERRA:MATERIEPRIME" did not converge after 500 warmup days.
** ~~~ ** ...Environment(RunPeriod)="SPINIGARDOLO"
** ~~~ ** ..Max Temp Comparison = 1.87E-002 vs Temperature
Convergence Tolerance=0.40 - Pass Convergence
** ~~~ ** ..Min Temp Comparison = 3.77E-002 vs Temperature
Convergence Tolerance=0.40 - Pass Convergence
** ~~~ ** ..Max Heat Load Comparison = 1.1570E-003 vs Loads
Convergence Tolerance=4.00E-002 - Pass Convergence
** ~~~ ** ..Max Cool Load Comparison = 0.4406 vs Loads
Convergence Tolerance=4.00E-002 - Fail Convergence
** Severe ** CheckWarmupConvergence: Loads Initialization,
Zone="1P%PRIMO:MENSA%CUCINA" did not converge after 500 warmup days.
** ~~~ ** ...Environment(RunPeriod)="SPINIGARDOLO"
** ~~~ ** ..Max Temp Comparison = 1.21 vs Temperature
Convergence Tolerance=0.40 - Fail Convergence
** ~~~ ** ..Min Temp Comparison = 4.13E-006 vs Temperature
Convergence Tolerance=0.40 - Pass Convergence
** ~~~ ** ..Max Heat Load Comparison = 2.1992E-002 vs Loads
Convergence Tolerance=4.00E-002 - Pass Convergence
** ~~~ ** ..Max Cool Load Comparison = 2.5579E-002 vs Loads
Convergence Tolerance=4.00E-002 - Pass Convergence
------------------------------------
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to
energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone
has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under
the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/