Outdoor Dry Bulb is contained in the weather files at hourly intervals. E+ interpolates this hourly value for each timestep, so I think it should match each hour, but will be different in between the hours.
The Building Performance Team
James V. Dirkes II, P.E., BEMP , LEED AP
1631 Acacia Drive NW
Grand Rapids, MI 49504
616 450 8653
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Jaime Zuluaga Machado
Sent: Tuesday, June 26, 2012 9:08 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support] Problem with Output:Variable
Thanks a lot, it works.
Another question, why the OutpuVariable Dry Bulb is different to the Weather File Temperature?
Thanks
Jaime Zuluaga M
From: Jim Dirkes <jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Sent: Tuesday, 26 June 2012, 7:20
Subject: RE: [EnergyPlus_Support] Problem with Output:Variable
Remember that the .RDD file is only created when using
Output:VariableDictionary, IDF;
The Building Performance Team
James V. Dirkes II, P.E., BEMP , LEED AP
1631 Acacia Drive NW
Grand Rapids, MI 49504
616 450 8653
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Javed Iqbal
Sent: Tuesday, June 26, 2012 7:39 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support] Problem with Output:Variable
Dear Jaime,
You need to run simulation once and check RDD file. There you will get list of Report variable based on your System Input.
Hope this works!
On Tue, Jun 26, 2012 at 4:22 AM, Jaime Zuluaga Machado <jaimezuluagam@xxxxxxxxx> wrote:
Hi everyone;
Does anyone know why when i am looking for any Output:Variable in the idf file and i create a new object and select a Variable Name no options appear there? i mean, i am not able to see any variable of the simulation.
Thanks a lot
Jaime Zuluaga M
--
Javed Iqbal, LEED AP, CEA
Energy Analyst
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___