[EnergyPlus_Support] how to fix the recurring errors

[Jia Hu <hujia06@xxxxxxxxx>]

Hi,

I use example file generator and use package unit HVAC system provided by the example file generator. I got many following recurring error, how can I fix this? If necessary I can provide the IDF file. Thank you! 

   ** Warning ** Coil:Cooling:DX:SingleSpeed "PSZ-AC_1:12:12_COOLC 1 DXCOIL" - Full load outlet air dry-bulb temperature < 2C. This indicates the possibility of coil frost/freeze. Outlet temperature = 1.94 C.

   **   ~~~   **  ...Occurrence info = LONDON/GATWICK - GBR IWEC Data WMO#=037760, 01/15 01:38 - 01:39

   **   ~~~   ** ... Possible reasons for low outlet air dry-bulb temperatures are: This DX coil

   **   ~~~   **    1) may have a low inlet air dry-bulb temperature. Inlet air temperature = 15.542 C.

   **   ~~~   **    2) may have a low air flow rate per watt of cooling capacity. Check inputs.

   **   ~~~   **    3) is used as part of a HX assisted cooling coil which uses a high sensible effectiveness. Check inputs.

   ** Warning ** Coil:Cooling:DX:SingleSpeed "PSZ-AC_1:6:6_COOLC 1 DXCOIL" - Full load outlet air dry-bulb temperature < 2C. This indicates the possibility of coil frost/freeze. Outlet temperature = 1.94 C.

   **   ~~~   **  ...Occurrence info = LONDON/GATWICK - GBR IWEC Data WMO#=037760, 01/15 01:45 - 01:46

   **   ~~~   ** ... Possible reasons for low outlet air dry-bulb temperatures are: This DX coil

   **   ~~~   **    1) may have a low inlet air dry-bulb temperature. Inlet air temperature = 15.542 C.

   **   ~~~   **    2) may have a low air flow rate per watt of cooling capacity. Check inputs.

   **   ~~~   **    3) is used as part of a HX assisted cooling coil which uses a high sensible effectiveness. Check inputs.

 ** Warning ** Coil:Cooling:DX:SingleSpeed "PSZ-AC_1:3:3_COOLC 1 DXCOIL" - Full load outlet air dry-bulb temperature < 2C. This indicates the possibility of coil frost/freeze. Outlet temperature = 1.66 C.

   **   ~~~   **  ...Occurrence info = LONDON/GATWICK - GBR IWEC Data WMO#=037760, 01/15 03:18 - 03:19

   **   ~~~   ** ... Possible reasons for low outlet air dry-bulb temperatures are: This DX coil

   **   ~~~   **    1) may have a low inlet air dry-bulb temperature. Inlet air temperature = 15.556 C.

   **   ~~~   **    2) may have a low air flow rate per watt of cooling capacity. Check inputs.

   **   ~~~   **    3) is used as part of a HX assisted cooling coil which uses a high sensible effectiveness. Check inputs.

__._,_.___

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___