RE: [EnergyPlus_Support] Actual Air flow ?

[ahneto@xxxxxx]

Dear Oscar,

Thanks for your help.

Alberto

Citando oscar hernandez <oscarhernandez_81@xxxxxxxxxxx>:

>
> Dear Alberto,
>
> Its normal. You have to add the values from 1 to 2 node from one  
> window and the 2 to 1 from the other window. You will have the same  
> values if you add the 2 to 1 from the first window and the 2 to 1  
> from the second window.
>
> I hope this helps
>
> Oscar
> To: EnergyPlus_Support@xxxxxxxxxxxxxxx
> From: ahneto@xxxxxx
> Date: Sat, 30 Jun 2012 02:17:19 -0300
> Subject: RE: [EnergyPlus_Support] Actual Air flow ?
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>       Dear Oscar,
>
>
>
> The problem is , for the same window, I am getting different values
>
> from the variable 1 to 2 and 2 to 1 in the same hour. I have another
>
> window in opposite wall with the same problem.
>
>
>
> Regards,
>
>
>
> Alberto
>
>
>
> Citando oscar hernandez <oscarhernandez_81@xxxxxxxxxxx>:
>
>
>
>>
>
>>
>
>> THe value 1 to 2 or 2 to 1  is the flow rate. You have to inside or
>
>> to outside.
>
>> To: EnergyPlus_Support@xxxxxxxxxxxxxxx
>
>> From: ahneto@xxxxxx
>
>> Date: Fri, 29 Jun 2012 13:54:19 -0300
>
>> Subject: [EnergyPlus_Support] Actual Air flow ?
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>       Dear Forum,
>
>>
>
>>
>
>>
>
>> I modeling a room with the AirFlowNetwork object. I would like to
>
>>
>
>> confirm the following:
>
>>
>
>>
>
>>
>
>> When I set as output variable AirflowNetwork Mass Flow Rate from Node
>
>>
>
>> 1 to 2 and AirflowNetwork Mass Flow Rate from Node 2 to 1 for a
>
>>
>
>> exterior window, the difference between these two variables will give
>
>>
>
>> the actual flow rate and the direction will be set verifiying which
>
>>
>
>> variable is greater?
>
>>
>
>>
>
>>
>
>> Regards,
>
>>
>
>>
>
>>
>
>> Alberto Hernandez Neto
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>





------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/