Don't worry.
If I remember, 1 to 2 is from outside to inside and 2 to 1 inside to outside. Look at the energyplus input output manual (airflow network) you have everything about that.
Let me know if you need more help.
Oscar.
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: ahneto@xxxxxx
Date: Sat, 30 Jun 2012 17:44:40 -0300
Subject: RE: [EnergyPlus_Support] Actual Air flow ?
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___
If I remember, 1 to 2 is from outside to inside and 2 to 1 inside to outside. Look at the energyplus input output manual (airflow network) you have everything about that.
Let me know if you need more help.
Oscar.
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: ahneto@xxxxxx
Date: Sat, 30 Jun 2012 17:44:40 -0300
Subject: RE: [EnergyPlus_Support] Actual Air flow ?
Dear Oscar,
Sorry to bother you again but , regarding the air flow network, how do
I know the direction (from inside to outside and vice versa) of the
flow in the window?
Thanks for your help.
Alberto
Citando oscar hernandez <oscarhernandez_81@xxxxxxxxxxx>:
>
>
> THe value 1 to 2 or 2 to 1 is the flow rate. You have to inside or
> to outside.
> To: EnergyPlus_Support@xxxxxxxxxxxxxxx
> From: ahneto@xxxxxx
> Date: Fri, 29 Jun 2012 13:54:19 -0300
> Subject: [EnergyPlus_Support] Actual Air flow ?
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Dear Forum,
>
>
>
> I modeling a room with the AirFlowNetwork object. I would like to
>
> confirm the following:
>
>
>
> When I set as output variable AirflowNetwork Mass Flow Rate from Node
>
> 1 to 2 and AirflowNetwork Mass Flow Rate from Node 2 to 1 for a
>
> exterior window, the difference between these two variables will give
>
> the actual flow rate and the direction will be set verifiying which
>
> variable is greater?
>
>
>
> Regards,
>
>
>
> Alberto Hernandez Neto
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
Sorry to bother you again but , regarding the air flow network, how do
I know the direction (from inside to outside and vice versa) of the
flow in the window?
Thanks for your help.
Alberto
Citando oscar hernandez <oscarhernandez_81@xxxxxxxxxxx>:
>
>
> THe value 1 to 2 or 2 to 1 is the flow rate. You have to inside or
> to outside.
> To: EnergyPlus_Support@xxxxxxxxxxxxxxx
> From: ahneto@xxxxxx
> Date: Fri, 29 Jun 2012 13:54:19 -0300
> Subject: [EnergyPlus_Support] Actual Air flow ?
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Dear Forum,
>
>
>
> I modeling a room with the AirFlowNetwork object. I would like to
>
> confirm the following:
>
>
>
> When I set as output variable AirflowNetwork Mass Flow Rate from Node
>
> 1 to 2 and AirflowNetwork Mass Flow Rate from Node 2 to 1 for a
>
> exterior window, the difference between these two variables will give
>
> the actual flow rate and the direction will be set verifiying which
>
> variable is greater?
>
>
>
> Regards,
>
>
>
> Alberto Hernandez Neto
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___