Hi, it is difficult to tell what is the problem.
The three objects you have listed will provide HVAC to one zone.
If you want to feed the building using an AHU, then you would need a HVACTemplate:System:Unitary and use air terminals in the zones.
You should get some results for one zone, with your objects.
You may post the IDF or send the IDF to me directly.
Dr. Li
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: barth.poker@xxxxxxxxxxxx
Date: Mon, 2 Jul 2012 14:13:22 +0000
Subject: [EnergyPlus_Support] 4 Zones templat is not cooling
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___
The three objects you have listed will provide HVAC to one zone.
If you want to feed the building using an AHU, then you would need a HVACTemplate:System:Unitary and use air terminals in the zones.
You should get some results for one zone, with your objects.
You may post the IDF or send the IDF to me directly.
Dr. Li
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: barth.poker@xxxxxxxxxxxx
Date: Mon, 2 Jul 2012 14:13:22 +0000
Subject: [EnergyPlus_Support] 4 Zones templat is not cooling
We are bulding an 4 zones building and we use 3 objects to built the hvac system...
HVACTemplate:Thermostat
HVACTemplate:Zone:Unitary
ThermostatSetpoint:DualSetpoint
i want the building to stay at a temperature between 20C and 25C
and i set the thermostat to that, but, when i open the table on excel, the temperature is different than that, almost the outdoor temperature.
We are students of the College UFMT (Universidade Federal do Mato Grosso -Brasil) and we are simulating the library of the university.
HVACTemplate:Thermostat
HVACTemplate:Zone:Unitary
ThermostatSetpoint:DualSetpoint
i want the building to stay at a temperature between 20C and 25C
and i set the thermostat to that, but, when i open the table on excel, the temperature is different than that, almost the outdoor temperature.
We are students of the College UFMT (Universidade Federal do Mato Grosso -Brasil) and we are simulating the library of the university.
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___