[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Re: Too many vertices
i not even have this object
i simulated the thermic load only with
HVACtemplate:Thermostat
HVACtemplate:Zone:Unitary
HVACtemplate:System:Unitary
the temperature is on the range that i need to be.. but this warning keeps coming up
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Linda Lawrie <linda@...> wrote:
>
> I believe you should not ask for that zone to be sized and the
> warning won't appear. Of course, if you need it to be sized for
> cooling, you can't remove the Sizing:Zone for that zone.
>
> You can look at the fields of the Sizing:Zone to see if you can turn
> it off from trying to size for heating, but I'm not sure that can be done.
>
> At 09:51 AM 7/4/2012, barth.poker wrote:
> >Just one more question..
> >it shows this warning too:
> >"** Warning ** Calculated design heating load for zone=411655 is zero."
> >
> >i know that it wasnt supposed to have any heating load for this zone..
> >
> >is it some way too fazer this warning dissapear?
> >
> >--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Linda Lawrie <linda@> wrote:
> > >
> > > At the bottom of each message:
> > >
> > > Primary EnergyPlus support is found at:
> > > http://energyplus.helpserve.com or send a message to
> > > energyplus-support@
> > >
> > > Might be best to go to the site and look at knowledgebase articles,
> > > etc. One of the troubleshooting leads might be how to send a file to
> > > the helpdesk. Or just submit a problem and attach the file.
> > >
> > > At 09:00 AM 7/4/2012, barth.poker wrote:
> > > >Hi, this is actually funyy because i change that to a very high
> > > >number for the porpouse of ignorate the last warning...
> > > >i put 1kk
> > > >mas this warning was poping up before i did that..
> > > >any thoughts?
> > > >and, sorry for the ignorance, but, how i send my idf file to the helpdesk?
> > > >
> > > >sorry for my bad english.
> > > >
> > > >--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Linda Lawrie <linda@> wrote:
> > > > >
> > > > > What does your ShadowCalculation object look like?
> > > > >
> > > > > The 2nd field in that object sets the number of figures in a shadow
> > > > > overlap but maybe this is a different detection.
> > > > > Feel free to send your input file to the helpdesk for further
> > > > > analysis or alleviation of this warning, if possible.
> > > > >
> > > > >
> > > > > At 08:31 AM 7/4/2012, barth.poker wrote:
> > > > > >Hi guys, my simulation was giving and overlapping shadow warnings
> > > > > >wicth i corrected.
> > > > > >But, Now is displaying this warning:
> > > > > >
> > > > > >"Too many vertices [>=12] in a shadow overlap"
> > > > > >
> > > > > >and then it told me to run the ExtraWarnings for more information
> > > > > >
> > > > > >and this came up:
> > > > > >" ** Warning ** Too many vertices [>=12] in a shadow overlap
> > > > > > ** ~~~ ** Overlapping figure=3965AF, Surface Class=[Detached
> > > > > > Shading:Building]
> > > > > > ** ~~~ ** This error occurred 1 times.
> > > > > > ** ~~~ ** Figure being Overlapped=79BA0A, Surface
> > > > > > Class=[Detached Shading:Building]
> > > > > > *************
> > > > > > ** Warning ** Too many vertices [>=12] in a shadow overlap
> > > > > > ** ~~~ ** Overlapping figure=E7C01A, Surface Class=[Detached
> > > > > > Shading:Building]
> > > > > > ** ~~~ ** This error occurred 1 times.
> > > > > > ** ~~~ ** Figure being Overlapped=4F4431, Surface
> > > > > > Class=[Detached Shading:Building]
> > > > > > *************
> > > > > > ** Warning ** Too many vertices [>=12] in a shadow overlap
> > > > > > ** ~~~ ** Overlapping figure=E3C3A1, Surface Class=[Detached
> > > > > > Shading:Building]
> > > > > > ** ~~~ ** This error occurred 1 times.
> > > > > > ** ~~~ ** Figure being Overlapped=D611AE, Surface
> > > > > > Class=[Detached Shading:Building]
> > > > > > *************
> > > > > > ** Warning ** Too many vertices [>=12] in a shadow overlap
> > > > > > ** ~~~ ** Overlapping figure=E942EA, Surface Class=[Detached
> > > > > > Shading:Building]
> > > > > > ** ~~~ ** This error occurred 1 times.
> > > > > > ** ~~~ ** Figure being Overlapped=E21B91, Surface
> > > > > > Class=[Detached Shading:Building]
> > > > > > *************
> > > > > > ** Warning ** Too many vertices [>=12] in a shadow overlap
> > > > > > ** ~~~ ** Overlapping figure=5578E7, Surface Class=[Detached
> > > > > > Shading:Building]
> > > > > > ** ~~~ ** This error occurred 1 times.
> > > > > > ** ~~~ ** Figure being Overlapped=3534EE, Surface
> > > > > > Class=[Detached Shading:Building]
> > > > > > *************
> > > > > > ** Warning ** Too many vertices [>=12] in a shadow overlap
> > > > > > ** ~~~ ** Overlapping figure=376846, Surface Class=[Detached
> > > > > > Shading:Building]
> > > > > > ** ~~~ ** This error occurred 1 times.
> > > > > > ** ~~~ ** Figure being Overlapped=79BA0A, Surface
> > > > > > Class=[Detached Shading:Building]"
> > > > > >
> > > > > >and i looked the shd file and it seems that is nothing i can
> > do about it
> > > > > >
> > > > > >Is a solution for this? Or some way the i could ignore this warning?
> > > > > >
> > > > > >
> > > > > >
> > > > > >------------------------------------
> > > > > >
> > > > > >Primary EnergyPlus support is found at:
> > > > > >http://energyplus.helpserve.com or send a message to
> > > > > >energyplus-support@
> > > > > >
> > > > > >The primary EnergyPlus web site is found at:
> > > > > >http://www.energyplus.gov
> > > > > >
> > > > > >The group web site is:
> > > > > >http://groups.yahoo.com/group/EnergyPlus_Support/
> > > > > >
> > > > > >Attachments are currently allowed but be mindful that not everyone
> > > > > >has a high speed connection. Limit attachments to small files.
> > > > > >
> > > > > >EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf
> > > > > >under the Documentation link and press the "search" button.
> > > > > >Yahoo! Groups Links
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > >
> > > >
> > > >
> > > >
> > > >------------------------------------
> > > >
> > > >Primary EnergyPlus support is found at:
> > > >http://energyplus.helpserve.com or send a message to
> > > >energyplus-support@
> > > >
> > > >The primary EnergyPlus web site is found at:
> > > >http://www.energyplus.gov
> > > >
> > > >The group web site is:
> > > >http://groups.yahoo.com/group/EnergyPlus_Support/
> > > >
> > > >Attachments are currently allowed but be mindful that not everyone
> > > >has a high speed connection. Limit attachments to small files.
> > > >
> > > >EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf
> > > >under the Documentation link and press the "search" button.
> > > >Yahoo! Groups Links
> > > >
> > > >
> > > >
> > >
> >
> >
> >
> >------------------------------------
> >
> >Primary EnergyPlus support is found at:
> >http://energyplus.helpserve.com or send a message to
> >energyplus-support@...
> >
> >The primary EnergyPlus web site is found at:
> >http://www.energyplus.gov
> >
> >The group web site is:
> >http://groups.yahoo.com/group/EnergyPlus_Support/
> >
> >Attachments are currently allowed but be mindful that not everyone
> >has a high speed connection. Limit attachments to small files.
> >
> >EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf
> >under the Documentation link and press the "search" button.
> >Yahoo! Groups Links
> >
> >
> >
>
------------------------------------
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/