Hi, Yes, Yes and I don"t know.
1. After you simulation go to the idf editor - output reporting - outpvaraible and chose zone mean air temperature.
2. You can add also in the same way, the comfort outputs vraibles but before you have to chose the method (fanger, KSU, Pierce, ASHRAE) in the internal gains-people.
3. I don"t know I have never used it.
I hope that it helps.
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: badhon0604131@xxxxxxxxx
Date: Mon, 9 Jul 2012 07:23:16 +0000
Subject: [EnergyPlus_Support] indoor air temperature
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___
1. After you simulation go to the idf editor - output reporting - outpvaraible and chose zone mean air temperature.
2. You can add also in the same way, the comfort outputs vraibles but before you have to chose the method (fanger, KSU, Pierce, ASHRAE) in the internal gains-people.
3. I don"t know I have never used it.
I hope that it helps.
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: badhon0604131@xxxxxxxxx
Date: Mon, 9 Jul 2012 07:23:16 +0000
Subject: [EnergyPlus_Support] indoor air temperature
Hello everyone,
i want to know is there any way
1.to get the zone indoor temperature after the stimulation to compare it with the outdoor temp and
2.in the result summary there is a option named comfort summary simple 55.that shows zone mean air temperature...is it the zone air temperature or it is just the comfort temperature for the zone?
3.if we give co ordinates of floor in the option Floor-ground contact,then do i have to input it again in building surface detailed?
i want to know is there any way
1.to get the zone indoor temperature after the stimulation to compare it with the outdoor temp and
2.in the result summary there is a option named comfort summary simple 55.that shows zone mean air temperature...is it the zone air temperature or it is just the comfort temperature for the zone?
3.if we give co ordinates of floor in the option Floor-ground contact,then do i have to input it again in building surface detailed?
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___