[EnergyPlus_Support] Fenestration ratio by jEPlus

["Amir" <amirhosein_ghoreishi@xxxxxxxxx>]

Hello,

I'm using jEPlus for a parametric study. For wall and slab thicknesses' variations, I put related search strings under corresponding materials in the .idf files and it works just fine; however, for window-to-wall ratio, I just don't seem to find where to place its search string. In other words, in the .idf files, where could I change the window-to-wall ratios?

Another question, if I had the whole building model as a parameters and wanted to see the impact of diffident interior layouts, e.g, on building energy performance, how could I use jEPlus for this task?

Many thanks



------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/