Re: [EnergyPlus_Support] Dview, results

[Miroslav Bratanov <miroslav_bratanov@xxxxxxxxx>]

Dear Veronika,
To use the RunManager and ResultsViewer you need to install OpenStudio Suite.
As you can see here https://openstudio.nrel.gov/downloads there are two options:

• OpenStudio Suite that installs the Sketchup plugin, ResultsViewer, RunManager etc.
  
• OpenStudio Legacy plugin that installs only the Sketchup plugin

Probably you have the OpenStudio Legacy plugin installed (if you downloaded it from the EERE website) and that's why you don't have the ResultsViewer and RunManager.
You can have both the Legacy plugin and the Suite installed at the same time and you can switch between the two through the Sketchup plugins menu.

Miroslav

On 27.08.2012 07:36, RAMKISHORE SINGH wrote:

 

Dear Veronika,

I am using Window-XP and I had no problem in installation as well in operation. I would suggest you to take help from IT person for installing Open Studio.

Or You may send me your file I can send you the graphs in the format as you required.

  



--- On Mon, 27/8/12, Veronika Shabunko <veronikashabunko@xxxxxxxxx> wrote:

From: Veronika Shabunko <veronikashabunko@xxxxxxxxx>
Subject: Re: [EnergyPlus_Support] Dview, results
To: "EnergyPlus_Support@xxxxxxxxxxxxxxx" <EnergyPlus_Support@xxxxxxxxxxxxxxx>
Date: Monday, 27 August, 2012, 11:32 AM

 

Dear RAMKISHORE SINGH, 

Thanks for your comment. I would like to use Resultviewer from Open Studio and yes this is one of the option to see results in graphics , but somehow in my computers it doesn't install the way I saw in youtube.com in training videos. There are no resultviewer, no manager and no options for air wall. I installed it several times to Mac and Window 7 and same in both.

As OpenStudio installed with GoogleschetchUp, maybe I dont understand how to deal with it. Any suggestions?

---

From: RAMKISHORE SINGH <ram_kishore_mbd@xxxxxxxxxxx>
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Sent: Monday, August 27, 2012 1:26 PM
Subject: Re: [EnergyPlus_Support] Dview, results

 

Dear Veronika,

Dview plots hourly/monthly variation of data i.e. x axis always indicates time (hourly or monthly) and y axis shows the variation of parameter that you want to plot with respect to x-axis, however, in your case you are trying to plot illuminance level at different points on the working floor and these points are identified by values of x and y axes from the origin and you have to take values of illuminance at secondary y axis. I think for this purpose Dview is not suitable plotter. I always use Resultsviewer of Open studio for plotting illuminance map, which correctly reads the map.csv from Eplus.

  RAMKISHORE SINGH

  (Ph.D. Energy)

  Research Associate

  TERI, NEW DELHI

--- On Sun, 26/8/12, Veronika Shabunko <veronikashabunko@xxxxxxxxx> wrote:

From: Veronika Shabunko <veronikashabunko@xxxxxxxxx>
Subject: [EnergyPlus_Support] Dview, results
To: "EnergyPlus_Support@xxxxxxxxxxxxxxx" <EnergyPlus_Support@xxxxxxxxxxxxxxx>
Date: Sunday, 26 August, 2012, 4:20 PM

 

Hi everyone,

I am doing simulation of house in tropics. In this simulations I added lights, AC unit for 5 zone, daylighting, illuminance and materials/constructions and building by itself. The results in tables looks ok. But when I use Dview for result viewing, the graphs that I see after adding MAP. EXE file to Dview make no sense, very strange graphs as you can see in attached file.

Please can anyone assist me with this matter. Where I've got wrong?

Is there any other way to see graphical results of the simulation?

Looking forward to hear some advices.

Thanks,

Best regards, Veronika

Energy Research Group UBD.

__._,_.___

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___