[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Re: GSHP coefficient
Hi,
I don't think that would be suitable because your heat pump may behave differently to the one that is modelled in the example file.
If you have the necessary data to make your own coefficients, it is not too difficult to obtain them in excel). If you don't have the data yet, of course the values given in the example would be sufficient to help you build your model, but for accuracy in your model in the long term, you would need to calculate the coefficients for that particular GSHP.
Aidan
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "shubou" <dingwenting@...> wrote:
>
> Aidan,
> Thank you very much for your advice.
> If I have the manufacturer data(flowrates, capacity and power), do you think whether it is proper to use the same coefficient just as the example file?
>
------------------------------------
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/