[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] AirLoopHVAC:ReturnPlenum 7.0 to 7.1 transition



If you got the error you said you did, the simulation should not have run.

At 12:28 PM 9/15/2012, Homero Noboa wrote:


Thanks Jim.

The program runs fine with the objects as they are. Not sure why the error message, but it seems not to prevent E+ from running.

Regards,


Homero.

On Sat, Sep 15, 2012 at 10:40 AM, Jim Dirkes < jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
 

Homero,

The ?Induced Air Outlet Node?? is optional and may remain blank.

The Error is referring to the next field, the ?Inlet 1 Node Name?, which is the node for air leaving the zone and would be the same name as the ?Zone Return Air node Name? in ZoneHVAC:EquipmentConnections.

 

James V Dirkes II, PE, BEMP, LEED AP
www.buildingperformanceteam.com
Energy Analysis, Commissioning & Training Services
1631 Acacia Drive, Grand Rapids, MI 49504 USA
616 450 8653

 

From: EnergyPlus_Support@xxxxxxxxxxxxxxx [ mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of hnoboam
Sent: Saturday, September 15, 2012 10:29 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] AirLoopHVAC:ReturnPlenum 7.0 to 7.1 transition

 

 

The AirloopHVAC:ReturnPlenum in version 7.1 has a new input called Induced Air Outlet Node or NodeList Name.
The translation tool left it blank, but when I try to run E+, it gives me the error:
** Severe ** Error detected in Object=AirLoopHVAC:ReturnPlenum, name=VAV_1 Return Plenum
** ~~~ ** Field [Inlet 1 Node Name] is required but was blank.

Any help will be appreciated

Homero




--
Homero Noboa, Ph. D.





__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___