[EnergyPlus_Support] HVAC ASHRAE 90.1 system: heating only

["caveleza" <camilovelez@xxxxxxxxxxxxxxxxxxx>]

Hello

I'm doing a simulation for LEED, but because our proposed HVAC system doesn't include heating, per ASHRAE it's required to simulate the heating system of the ASHRAE 90.1 system 8 (in this case), wich I guess would be only the PFP Boxes (this includes a PIU Fan and the electric coil), is this correct?

If it's correct to simulate only the PFP boxes, does somebody know how to do it? I had tried several ways to simulate only the PFP boxes, but I'm having problems doing it. Or can I use a template? Maybe using the Zone:Unitary and System:Unitary, and simulating only the heating coil... does anybody know if this would be a valid approach?

Thank you!



------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/