[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [EnergyPlus_Support] Runs terminate without completing error file
Does this (or these) file run by itself (i.e., not included in a set of
files)?
On 9/20/2012 11:44 AM, moe_wilensky wrote:
> When performing a large set of runs on a remote Linux cluster a subset (a smallish subset, ~80 of 120k, and more or less the same subset each time) fails every time I perform the run. There does not appear to be sufficient information in the error file to diagnose the issue as the simulation just appears to stop (see attached) there is no consistent warning(s) (of those that are reported before the failure occurs) that occur across only the failed runs.The stuff at the top of the error file varies from run to run but it always fails just after "Beginning Simulation".
>
> I would appreciate any guidance you may have.
>
> Thanks,
>
> Will
>
>
> Example Error File:
>
> Program Version,EnergyPlus, Linux, VERSION 6.0.0.023,IDD_Version 6.0.0.023
> ** Warning ** GetProjectData: Output:Diagnostics="DISPLAYADVANCEDVARIABLES", Invalid value for field, entered value ignored.
> ** Warning ** ManageSizing: For a zone sizing run, there must be at least 1 Sizing:Zone input object. SimulationControl Zone Sizing option ignored.
> ************* Beginning Plant Sizing Calculations
> ** Warning ** Output:Meter:MeterFileOnly: invalid Name="DISTRICTCOOLING:FACILITY" - not found.
> ** Warning ** Output:Meter:MeterFileOnly: invalid Name="DISTRICTHEATING:FACILITY" - not found.
> ** Warning ** Output:Meter:MeterFileOnly: invalid Name="COOLING:ELECTRICITY" - not found.
> ** Warning ** Output:Meter:MeterFileOnly: invalid Name="HEATING:ELECTRICITY" - not found.
> ** Warning ** Output:Meter:MeterFileOnly: invalid Name="HEATING:GAS" - not found.
> ** Warning ** Output:Meter:MeterFileOnly: invalid Name="FANS:ELECTRICITY" - not found.
> ** Warning ** Output:Meter:MeterFileOnly: invalid Name="WATERSYSTEMS:GAS" - not found.
> ************* Testing Individual Branch Integrity
> ************* All Branches passed integrity testing
> ************* Testing Individual Supply Air Path Integrity
> ************* All Supply Air Paths passed integrity testing
> ************* Testing Individual Return Air Path Integrity
> ************* All Return Air Paths passed integrity testing
> ************* No node connection errors were found.
> ************* Beginning Simulation
>
> At which point there is not more content, the stuff at eh top of the error file varies form run to run but ti always fails just after "Beginning Simulation"
>
>
>
>
> ------------------------------------
>
> Primary EnergyPlus support is found at:
> http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
>
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
>
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
>
> Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
>
> EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
> Yahoo! Groups Links
>
>
>
>
--
Richard A. Raustad
Senior Research Engineer
Florida Solar Energy Center
University of Central Florida
1679 Clearlake Road
Cocoa, FL 32922-5703
Phone: (321) 638-1454
Fax: (321) 638-1439 or 1010
Visit our web site at: http://www.fsec.ucf.edu
UCF - From Promise to Prominence: Celebrating 40 Years
------------------------------------
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/