[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] error temperature out of boundary

good day,
i have simulated my building but it has a error, maybe a surface is too small, i dont how why i get this errocr.

thank you to any help.
   ** Severe  ** Temperature (low) out of bounds [-105.04] for zone="PISO2:CIRCULACION1", for surface="PISO2:CIRCULACION1_ROOF_1_7_2"
   **   ~~~   **  During Warmup & Sizing, Environment=SUMMER DESIGN DAY IN PANORAMA, at Simulation time=01/15 17:45 - 17:48
   **   ~~~   ** Zone="PISO2:CIRCULACION1", Diagnostic Details:
   **   ~~~   ** ...Internal Heat Gain [6.850] W/m2
   **   ~~~   ** ...Infiltration/Ventilation [0.114] m3/s
   **   ~~~   ** ...Mixing/Cross Mixing [0.000] m3/s
   **   ~~~   ** ...Zone is not part of HVAC controlled system.


   ** Severe  ** Temperature (low) out of bounds [-105.04] for zone="PISO2:CIRCULACION1", for surface="PISO2:CIRCULACION1_ROOF_1_7_2"
   **   ~~~   **  During Warmup & Sizing, Environment=SUMMER DESIGN DAY IN PANORAMA, at Simulation time=01/15 17:45 - 17:48
   **   ~~~   ** Zone="PISO2:CIRCULACION1", Diagnostic Details:
   **   ~~~   ** ...Internal Heat Gain [6.850] W/m2
   **   ~~~   ** ...Infiltration/Ventilation [0.114] m3/s
   **   ~~~   ** ...Mixing/Cross Mixing [0.000] m3/s
   **   ~~~   ** ...Zone is not part of HVAC controlled system.
   **  Fatal  ** CalcHeatBalanceInsideSurf: Program terminates due to preceding conditions.
   ...Summary of Errors that led to program termination:
   ..... Reference severe error count=6
   ..... Last severe error=Temperature (low) out of bounds [-105.04] for zone="PISO2:CIRCULACION1", for surface="PISO2:CIRCULACION1_ROOF_1_7_2"
   ************* Warning:  Node connection errors not checked - most system input has not been read (see previous warning).
   ************* Fatal error -- final processing.  Program exited before simulations began.  See previous error messages.
   ** Warning ** DXFOut: Could not triangulate surface="PISO1D:CAFETERIA_CEILING_1_0_12", type="Roof", check surface vertex order(entry)
   **   ~~~   ** ...use Output:Diagnostics,DisplayExtraWarnings; to show more details on individual surfaces.



------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/