[EnergyPlus_Support] Heated floor with recirculation

["FrancescoP" <direzionecontraria@xxxxxxxx>]

I have posted an image from the design drawings of the plant that I'm modelling: http://imageshack.us/a/img585/41/hotwaterloop.jpg
In the plat there are both water radiators and heated floors. The supply temperature of the heated floors is lower than the supply temperature of the water radiator, although the boiler is the same. In fact, the heated floors have a specific secondary loop with water recirculation. What is the best solution to model such a configuration?
I start modelling in DesignBuilder and then I develop the model in EnergyPlus.
With Regards
Francesco Passerini



------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/