[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] VRF system: Cooling only

Hello to all

Sorry for no answering before, but it was a tough week...

Richard I can't recall what were the errors that I got... I vaguely remember that they were about some schedules, and this is why I thought that E+ went "crazy" when I removed the Heating coils; anyway since you said that it should work I tried again, and this time it work out without any problem, maybe I was missmatching some nodes, I don't know for sure.

Chandan thank you for your suggestion, that should work, but I did it the way the Richard told me and that way it work out.

Thank you both for your help!

2012/9/24 Richard Raustad <RRaustad@xxxxxxxxxxxx>

Removing the heating coil from the VRF terminal unit should work, I have
done that in the past. What are the errors?

On 9/24/2012 4:40 PM, caveleza wrote:
> tried to remove the coil: E+ started to give me weird errors.

Richard A. Raustad
Senior Research Engineer
Florida Solar Energy Center
University of Central Florida
1679 Clearlake Road
Cocoa, FL 32922-5703
Phone: (321) 638-1454
Fax: (321) 638-1439 or 1010
Visit our web site at: http://www.fsec.ucf.edu

UCF - From Promise to Prominence: Celebrating 40 Years


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe