[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Bldg-sim] Modeling an UPS

To: bldg-sim@xxxxxxxxxxxxxxxxxxxxx, EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [Bldg-sim] Modeling an UPS
From: "Camilo Velez :::Green Factory:::" <camilovelez@xxxxxxxxxxxxxxxxxxx>
Date: Sun, 30 Sep 2012 22:39:28 -0500
Delivery-date: Sun, 30 Sep 2012 21:39:43 -0600
Envelope-to: linda@xxxxxxxxxxxxxx
List-archive: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org>
List-help: <mailto:bldg-sim-request@lists.onebuilding.org?subject=help>
List-id: Users of building energy simulation tools <bldg-sim-onebuilding.org>
List-post: <mailto:bldg-sim@lists.onebuilding.org>
List-subscribe: <http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org>, <mailto:bldg-sim-request@lists.onebuilding.org?subject=subscribe>
List-unsubscribe: <http://lists.onebuilding.org/options.cgi/bldg-sim-onebuilding.org>, <mailto:bldg-sim-request@lists.onebuilding.org?subject=unsubscribe>
Sender: bldg-sim-bounces@xxxxxxxxxxxxxxxxxxxxx

Hello all

I'm trying to mdel an UPS (Uninterruptible Power System) but I'm not sure of what would be the power that I should model. The capacity of the UPS is 100KVA, but this capacity will be use only when a "emergency" happens, the rest of the time the UPS will be in some kind of "stand by" mode with the battery full charged, so how much it will consume while it is in this mode?

Thank you.

Follow-Ups:
- [EnergyPlus_Support] Re: Modeling an UPS
  - From: Jean marais
- Re: [Bldg-sim] Modeling an UPS (UNCLASSIFIED)
  - From: Eurek, John S NWO

Prev by Date: Re: [EnergyPlus_Support] VRF system: Cooling only
Next by Date: [EnergyPlus_Support] Re: Modeling an UPS
Previous by thread: [EnergyPlus_Support] Re: SURFACE COVECTION ALGORITHM
Next by thread: [EnergyPlus_Support] Re: Modeling an UPS
Index(es):
- Date
- Thread