Thanks for your reply.
I have tried to write down my thoughts using "!" in text editor.
However, it is very difficult for me to make a note my thoughts effectively only using characters and symbols.
If images and rich text are supported, it would be better for reading and summarizing one’s comments.
(The images can be drawings or PPT or air/water loops or control signal flow (such as a block diagram)).
The reason why “NO ONE” suggest this function may be most of the EP users are so skilled and satisfied, thus they may not need this function (except for me J).
It is just my opinion, any reply would be appreciated.
Best Regards,
Deuk-Woo Kim
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Jeremiah Crossett
Sent: Friday, October 05, 2012 10:31 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support] Reg: Energyplus version 6.1
Deuk,
Users have had an ability to do something similar to this since the beginning- all that has to be done is use the explanation "!" symbol.
Hence the description in all IDF's
!-NOTE: All comments with '!-' are ignored by the IDFEditor and are generated automatically.
!- Use '!' comments if they need to be retained when using the IDFEditor.
Jeremiah D. Crossett | Senior Analyst | Phase Change Energy Solutions
120 E. Pritchard St. | Asheboro, NC 27203 | Mobile 503-688-8951
On Thu, Oct 4, 2012 at 6:05 PM, Linda Lawrie <linda@xxxxxxxxxxxxxx> wrote:
Given that NO ONE has suggested that until now -- it's unlikely.
IDF Editor can incorporate any comments.
On 2012-10-04 18:59, 김덕우 wrote:
> Dear Linda,
>
> I hope that EP v7.2 has a capability for “writing-a-note” function
> inside EP Editor, like MS word.
>
> Users can copy and paste images and write down their thoughts to the
> IDF for better reading; hence
>
> - they can reconstruct/recall what he/she did on IDFs before,
>
> - make a note of some important things for simulation thus keeps
> their
> memory alive,
>
> - and so on.
>
> Thanks in advance
>
> Best Regards,
> Deuk-Woo Kim
>
> ----------------------------------------------------------
>
> Ph.D. Candiate
> Department of Architectural Engineering, College of Engineering,
> SungKyunKwan University,
> Suwon, 440-746, South Korea
> * Tel: +82-31-299-4774
>
> * E-mail: deukwookim@xxxxxxxx [2]
>
> * Lab. Homepage: http://bs.skku.ac.kr/ [3]
>
> * Personal Homepage: http://brainwt.weebly.com [4]
>
> FROM: EnergyPlus_Support@xxxxxxxxxxxxxxx
> [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] ON BEHALF OF Linda Lawrie
> SENT: Thursday, October 04, 2012 2:39 AM
> TO: EnergyPlus_Support@xxxxxxxxxxxxxxx
> SUBJECT: Re: [EnergyPlus_Support] Reg: Energyplus version 6.1
>
> We expect an on-time official release on Oct 15. We may have
> installers ready earlier for those who want to try them. At this
> point, the core EnergyPlus and documentation are locked down, so it
> would be relatively minor things/typos that would be changed from the
> early release to the final. (And, of course, we'd like you to
> register
> for the final even if you don't download and install that final
> installer).
>
> We have had an active beta area going since the last release. Though
> there haven't been as many problems surface for this upcoming release
> as there were for the V7.1 release (back in May).
>
> At 11:31 AM 10/3/2012, Stefano Moret wrote:
>
>> Dear Linda,
>>
>> In relation to this last point, do you have a tentative release date
>> for the v7.2?
>>
>> Regards,
>> Stefano
>> Il giorno 02/ott/2012 18:20, "Linda Lawrie" <linda@xxxxxxxxxxxxxx
>> [1]> ha scritto:
>
> a) there is no version V6.1
>
> b) only the latest version is available
>
> c) you can convert any files to the later version using the update
> conversion program:
>
>
> http://energyplus.helpserve.com/Knowledgebase/List/Index/46/converting-older-version-files
> [5]
>
> d) in a short time V7.2 will be released.
>
> At 08:17 AM 10/2/2012, kshitij chandrasen wrote:
>
> Hello All,
>
> I'm looking for the windows 32 bit version of EnergyPlus 6.1. It'll
> be
> great if someone could share it along with the password.
>
> Thanks,
>
> --
>
> Kshitij Chandrasen
>
>
>
> Links:
> ------
> [1] mailto:linda@xxxxxxxxxxxxxx
> [2] mailto:deukwookim@xxxxxxxx
> [3] http://bs.skku.ac.kr/
> [4] http://brainwt.weebly.com/
> [5]
>
> http://energyplus.helpserve.com/Knowledgebase/List/Index/46/converting-older-version-files
> [6] http://energyplus.helpserve.com
> [7] http://www.energyplus.gov
> [8] http://groups.yahoo.com/group/EnergyPlus_Support/
> [9]
>
> http://groups.yahoo.com/group/EnergyPlus_Support/join;_ylc=X3oDMTJmdjdjY3VwBF9TAzk3NDc2NTkwBGdycElkAzMzODc0ODgEZ3Jwc3BJZAMxNzA1MDA3Mzg5BHNlYwNmdHIEc2xrA3N0bmdzBHN0aW1lAzEzNDkzOTg4NzE-
> [10]
>
> mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx?subject=EmailDelivery:Digest
> [11]
>
> http://groups.yahoo.com/group/EnergyPlus_Support;_ylc=X3oDMTJkYWFsc3E2BF9TAzk3NDc2NTkwBGdycElkAzMzODc0ODgEZ3Jwc3BJZAMxNzA1MDA3Mzg5BHNlYwNmdHIEc2xrA2hwZgRzdGltZQMxMzQ5Mzk4ODcx
> [12] http://docs.yahoo.com/info/terms/
> [13]
>
> mailto:EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___