[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Number of PSZ-AZ systems for baseline model

I created a baseline model according to system 4 (PSZ-HP) of annex G of ASHRAE 90.1-2007. I connected every PSZ-HP system with more than one zone. Now I'm observing that systems have problems in meeting the setpoint temperatures, because AirLoopHVAC:UnitaryHeatPump:AirToAir can have only one "Controlling zone" (or "Thermostat Location"). Therefore I think that I have to create more PSZ-HP systems. Do you agree or do you think that there are other solutions? 
Generally do you create a PSZ-HP system for every zone?
With Regards


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to: