Hi guys... first of all, sorry about my english 'cause I´m brazilian...
I'm having trouble about simulating with other material. I ran the simulation with a material wich the property goes below:
Name: concreto
thickness: 0.1m
conductivity: 1.75 W/mK
Density: 2300 kg/m³
specific heat: 1000 J/kg.K
The other material is:
name: Concreto celular
thickness:0.125m
conductivity: 0.35 W/mK
Density: 500 kg/m³
Specific heat: 1250 J/kg.K
When I run with concreto celular, the district cooling is higher than concreto. And also the surface inside temperature is higher than concreto. Isn't it strange? The conductivity is lower, but all of the variables shows higher temperature or cooling power higher...
Ps: The concreto celular's absorptance is lower than concreto.
Can anyone help me out?
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___