Sent from my iPhone
Niraj,
i have not used the example file generator, so my answer has this preempt.
The Slab and Basement preprocessors are designed for specific cases. The Basement preprocessor only half or full height vertical insulation, no intermediate height insulation. Further, the ground covers up to the top of the basement walls.
i have a nearly square 150 m2 wooden floor that is raised 400mm above ground. The floor is too cold in Melbourne Australia winter. Any suggestion on how to insulate?
ooi
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Niraj Poudel <nirajpdl@...> wrote:
>
> Hi Ooi,
>
> Yeah I can add insulation myself. I am was wondering if the Example File
> Generator used vertical insulation to calculate the ground temperature
> values for the DOE climate zones 6,7 and 8. If not then I might have to add
> insulation myself and run the basement program for the
> buildingsurfacetemperature values.
>
> Thanks for responding.
> Niraj
>
>
>
>
> On Mon, Nov 12, 2012 at 9:40 PM, Ooi <ooi_kb3@...> wrote:
>
> > **
> >
> >
> > Hi Niraj, Can you not add the insulation into the construction of your
> > floor? ooi
> >
> >
> > --- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Niraj Poudel <nirajpdl@>
> > wrote:
> > >
> > > Dear All,
> > >
> > > I have a rather rudimentary question. When using the "Energyplus -
> > Example
> > > file generator" in compliance with the ASHRAE 90.1 2007 standard, the
> > > example files that are generated come with the climate specific monthly
> > > BuildingGroundsurface temperatures in the .idf file.
> > >
> > > For instance, when one requests for an example file for Fairbanks,
> > Alaska,
> > > it comes with its own set of Building GroundSurface temperatures. So my
> > > question is, when Energyplus Example file generator creates the idf file
> > > for Fairbanks, Alaska (Climate zone 8) does it take into account that the
> > > unheated slab also has a layer of insulation with a R-value of 2.6 (In
> > S-I
> > > units) for a 600 mm slab?
> > >
> > > Thank you all in advance.
> > > Sincerely yours'
> > > Niraj
> > >
> > >
> > > --
> > > Niraj Poudel, Architectural Engineer.
> > > PhD student, PDBE Program.
> > > Clemson University, Clemson, SC.
> > >
> >
> >
> >
>
>
>
> --
> Niraj Poudel, Architectural Engineer.
> PhD student, PDBE Program.
> Clemson University, Clemson, SC.
>
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___