[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: proposed desing CS proyect

Thank you, the baseline case is already modeled. My question is about the proposed building because it is not completed designed and i am not sure if i am modelling it correct or not. 

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, jeannieboef <jeannieboef@...> wrote:
> The design case is modeled as designed. The baseline case system  
> selection is mainly based on the fuel type used in the proposed design  
> for heating. See the norm for selection. It is just one "dominant"  
> system and not mixed, unless one or more of the exceptions apply.
> Sent from my iPhone
> On 20.11.2012, at 17:58, "andresdagm" <andresdagm@...> wrote:
> > My proposed desing has a mechanical ventilation system, there are  
> > injector fan that will provide outdoor air to each zone. There are  
> > one injector per vertical duct. Furthermore, no coils have been  
> > designed, just there will be chillers and each tenant will install  
> > their coils. (Surely, There will be fancoils but it won't be in any  
> > lease agreement and it is not designed)
> > I think that I need to make a mix between the proposed and baseline  
> > (system 8), I will model the injector fans and I will include coils  
> > of cold water, in each zone I will install a parallel piu reheat  
> > like in the baseline, I don't know if it is right or not???, because  
> > in the baseline I have VAV systems, and one per floor, and in my  
> > proposed I am modeling CAVs (the injector fan are constants.)
> >
> > I really appreciate your help and corrections.
> > Dante García
> >
> >


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to: