Thank you, the baseline case is already modeled. My question is about the proposed building because it is not completed designed and i am not sure if i am modelling it correct or not.
--- In
EnergyPlus_Support@xxxxxxxxxxxxxxx, jeannieboef <jeannieboef@...> wrote:
>
> The design case is modeled as designed. The baseline case system
> selection is mainly based on the fuel type used in the proposed design
> for heating. See the norm for selection. It is just one "dominant"
> system and not mixed, unless one or more of the exceptions apply.
>
> Sent from my iPhone
>
> On 20.11.2012, at 17:58, "andresdagm" <andresdagm@...> wrote:
>
> > My proposed desing has a mechanical ventilation system, there are
> > injector fan that will provide outdoor air to each zone. There are
> > one injector per vertical duct. Furthermore, no coils have been
> > designed, just there will be chillers and each tenant will install
> > their coils. (Surely, There will be fancoils but it won't be in any
> > lease agreement and it is not designed)
> > I think that I need to make a mix between the proposed and baseline
> > (system 8), I will model the injector fans and I will include coils
> > of cold water, in each zone I will install a parallel piu reheat
> > like in the baseline, I don't know if it is right or not???, because
> > in the baseline I have VAV systems, and one per floor, and in my
> > proposed I am modeling CAVs (the injector fan are constants.)
> >
> > I really appreciate your help and corrections.
> > Dante GarcÃa
> >
> >
>