[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: Subsurface error



I was not able to figure out why I was getting the subsurface error.  Everything seemed to be correct, however, I was able to work around the error by breaking the base surfaces into smaller rectangular pieces.  So please disregard my earlier messages on this issue.  I have removed my problem file submission.

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Mostapha Sadeghipour <sadeghipour@...> wrote:
>
> Do you want to share the .idf file so I can take a look.
> 
> The other possibility in case you have more than one sub-surface for SURFACE
> 19 [which is probably is the case in your example since it called as SUB
> SURFACE *3*] is that the total area of sub-surfaces is bigger than the area
> of the base surface.
> 
> Best,
> Mostapha
> 
> On Sat, Dec 1, 2012 at 2:47 PM, <dru.crawley@...> wrote:
> 
> > It means your door is either not in the plane of the or it is too big for
> > the wall.  Doors and windows must be slightly smaller than the wall they
> > are in.
> >
> >
> > -------- Original message --------
> > From: thevinyldropper <thevinyldropper@...>
> > Date:
> > To: EnergyPlus_Support@xxxxxxxxxxxxxxx
> > Subject: [EnergyPlus_Support] Subsurface error
> >
> >
> >
> >
> > I have the following error regarding a large door on a building wall. No
> > matter how many times I try, I cannot get rid of it. I have ensured that
> > the coordinates of the subsurface are indeed within the base surface. I
> > have also checked and rechecked to ensure that the coordinates are in the
> > right order (starting in the UpperLeftCorner and in a CounterClockwise
> > direction as mandated by my GlobalGeometryRules settings).
> >
> > ** Warning ** Base surface does not surround subsurface (CHKSBS), Overlap
> > Status=No-Overlap
> > ** ~~~ ** The base surround errors occurred 1 times.
> > ** ~~~ ** Surface "SURFACE 19" misses SubSurface "SUB SURFACE 3"
> >
> > Anyone ever had this issue before?
> >
> >
> >
> >
> >
> > ------------------------------------
> >
> > Primary EnergyPlus support is found at:
> > http://energyplus.helpserve.com or send a message to
> > energyplus-support@...
> >
> > The primary EnergyPlus web site is found at:
> > http://www.energyplus.gov
> >
> > The group web site is:
> > http://groups.yahoo.com/group/EnergyPlus_Support/
> >
> > Attachments are currently allowed but be mindful that not everyone has a
> > high speed connection.  Limit attachments to small files.
> >
> > EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the
> > Documentation link and press the "search" button.
> > Yahoo! Groups Links
> >
> >
> >
> >
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/