[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Re: Adding zones in Open studio after the building is already made



how does it behave when one cuts a bunch of selected faces, create zone, activate zone and paste the selection into the zone wrapper?

Sent from my iPhone

On 05.01.2013, at 22:50, David Goldwasser <david.f.goldwasser@xxxxxxxxx> wrote:

 

While you can't directly convert a generic SketchUp Model to an OpenStudio or EnergyPlus model, you can use it as a guide.

Here is a link to a tutorial on using a 3d model as a guide.

And here are links to two videos on using imported plans and elevations to create an OpenStudio model.

In both cases if your architectural model is updated, you can re-import it and then adjust the energy model as necessary to reflect the changes.

David

--
David Goldwasser



__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___