but the room is on the 2nd floor, and the room below is not using air conditioner.
Should I still set outside condition as ground.
Regards,
Joey
发件人: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] 代表 jeannieboef
发送时间: 2013年1月6日 16:29
收件人: EnergyPlus_Support@xxxxxxxxxxxxxxx
抄送: EnergyPlus_Support@xxxxxxxxxxxxxxx
主题: Re: [EnergyPlus_Support] air conditioning load
Floor slab against ground should have boundry condition set to ground, not outside. Outside surfaces are exposed to sun and wind.
Try that.
Regards
Jean
Sent from my iPhone
On 06.01.2013, at 08:43, "cescjy" <cescjy@xxxxxxxxx> wrote:
Hi everyone,
I`ve got a problem while calculating air conditioning load for a typical building.
Generally, the problem is when I set 'outside boundary condition' of roof and floor from 'surface' to 'outdoor' AC load of winter increases as expected. However,the AC load of summer decreases other than 'increase'. After all, while all set 'outdoor', AC load of winter is larger than that of summer. This is very wired. Can anybody explain for me? Or there is something wrong with my configuration. Thanks very much!
Joey
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___