[EnergyPlus_Support] Re: infiltration report not generated

["junegomez81" <junegomez81@xxxxxxxxx>]

Thank you very much to both of you!

I have solved the problem following your advice! Thank you.

I will also check the video. I had made some minor things in the IDF, but had not touched the output part...

Kind regards,

june

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Jeremiah Crossett  wrote:
>
> The results you have may be from the HTML file. I think ecotech uses E+ V5
> (?) anyhow you will get much more from E+ if you learn how to modify files
> created in an interface (such as ecotech) using the E+ IDF editor.  For
> instance there are thousands of output reporting options. You might start
> with this video: http://www.youtube.com/watch?v=XcrqqqQqGXg
> *
> *
> *
> *
> *Jeremiah D. Crossett  | Senior Analyst  |  Phase Change Energy Solutions*
> *
> 120 E. Pritchard St.  | Asheboro, NC 27203  | Mobile 503-688-8951
> www.phasechange.com
> *
> 
> *
> *
> *
> *
> 
> 
> 
> On Mon, Jan 7, 2013 at 3:21 PM, junegomez81  wrote:
> 
> > **
> >
> >
> > Thank you very much for your help.
> >
> > I exported my model from Ecotect to EnergyPlus and I didn't change
> > anything in the IDF regarding output reporting. I'm trying to do what you
> > have told me now...
> >
> > Just one question. Does the fact that those reports haven't been generated
> > mean that the results I have (solar gains, fabric gains, fabric losses...)
> > are not completely right?
> >
> > Thank you.
> >
> > june
> >
> >
> > --- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "L Lawrie" wrote:
> > >
> > > These look like really old variable names. You should generate a
> > variable dictionary report and look for the correct names in the .rdd file.
> > >
> > >
> > > --- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "junegomez81" wrote:
> > > >
> > > > Hi,
> > > > I am using EnergyPlus to analyse the performance of a naturally
> > > > ventilated house. I am comparing how it performs with the windows
> > closed
> > > > and 1ach infiltration and with open windows.
> > > > However, in both cases I get the following error message:
> > > > Warning ** The following Report Variables were requested but not
> > > > generated ** ~~~ ** because IDF did not contain these elements or
> > > > misspelled variable name -- check .rdd file ************* Key=*,
> > > > VarName=INFILTRATION SENSIBLE HEAT LOSS, Frequency=Hourly
> > > > ************* Key=*, VarName=INFILTRATION SENSIBLE HEAT GAIN,
> > > > Frequency=Hourly ************* Key=*, VarName=LIGHTS TOTAL HEAT GAIN,
> > > > Frequency=Hourly ************* Key=*, VarName=ELECTRIC EQ-TOTAL HEAT
> > > > GAIN, Frequency=Hourly
> > > > I am a new user, so I would be grateful if somebody could lend me a
> > > > hand. What should I check?
> > > > Thank you!
> > > > june
> > > >
> > >
> >
> >  
> >
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/