[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Re: infiltration report not generated



The results you have may be from the HTML file. I think ecotech uses E+ V5 (?) anyhow you will get much more from E+ if you learn how to modify files created in an interface (such as ecotech) using the E+ IDF editor.  For instance there are thousands of output reporting options. You might start with this video: http://www.youtube.com/watch?v=XcrqqqQqGXg


Jeremiah D. Crossett  | Senior Analyst  |  Phase Change Energy Solutions
120 E. Pritchard St.  | Asheboro, NC 27203  | Mobile 503-688-8951
www.phasechange.com 
  





On Mon, Jan 7, 2013 at 3:21 PM, junegomez81 <junegomez81@xxxxxxxxx> wrote:
 

Thank you very much for your help.

I exported my model from Ecotect to EnergyPlus and I didn't change anything in the IDF regarding output reporting. I'm trying to do what you have told me now...

Just one question. Does the fact that those reports haven't been generated mean that the results I have (solar gains, fabric gains, fabric losses...) are not completely right?

Thank you.

june



--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "L Lawrie" wrote:
>
> These look like really old variable names. You should generate a variable dictionary report and look for the correct names in the .rdd file.
>
>
> --- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "junegomez81" wrote:
> >
> > Hi,
> > I am using EnergyPlus to analyse the performance of a naturally
> > ventilated house. I am comparing how it performs with the windows closed
> > and 1ach infiltration and with open windows.
> > However, in both cases I get the following error message:
> > Warning ** The following Report Variables were requested but not
> > generated ** ~~~ ** because IDF did not contain these elements or
> > misspelled variable name -- check .rdd file ************* Key=*,
> > VarName=INFILTRATION SENSIBLE HEAT LOSS, Frequency=Hourly
> > ************* Key=*, VarName=INFILTRATION SENSIBLE HEAT GAIN,
> > Frequency=Hourly ************* Key=*, VarName=LIGHTS TOTAL HEAT GAIN,
> > Frequency=Hourly ************* Key=*, VarName=ELECTRIC EQ-TOTAL HEAT
> > GAIN, Frequency=Hourly
> > I am a new user, so I would be grateful if somebody could lend me a
> > hand. What should I check?
> > Thank you!
> > june
> >
>




__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___