Jeez, I can't believe I missed that. I
saw "Ceiling" and assumed the other one was correct too.
On 1/22/2013 1:46 PM, Linda Lawrie wrote:
First off, walls are not usually flat.
That may be a clue.
If it is a floor/ceiling, EnergyPlus applies different
rules.
At 02:44 PM 1/22/2013, Cody Rose wrote:
Hello,
I received the following warning:
** Warning ** GetSurfaceData: InterZone Surface
Azimuths do not
match as expected.
** ~~~ **
Azimuth=270.0, Tilt=180.0, in
Surface=0J8KFINJV0B9CVEUNR2CDF, Zone=PLENUM
** ~~~ **
Azimuth=180.0, Tilt=0.0, in
Surface=14KF$QRCJ1HQWVE7M35$CE, Zone=BANKING FLOOR
** ~~~ ** ..surface class of
base surface=Wall
The surfaces in question are defined as follows:
BuildingSurface:Detailed,
0j8kFINjv0b9cVEuNR2cdf, !- Name
Wall,
!- Surface Type
04 | CStone 04 (0.050), !- Construction
Name
Plenum,
!- Zone Name
Surface,
!- Outside Boundary Condition
14kF$qRcj1hQwve7M35$Ce, !- Outside
Boundary Condition Object
NoSun,
!- Sun Exposure
NoWind,
!- Wind Exposure
Autocalculate,
!- View Factor to Ground
Autocalculate,
!- Number of Vertices
20.149,20.898,4.05, !- X,Y,Z ==> Vertex
1 {m}
23.894,19.962,4.05, !- X,Y,Z ==> Vertex
2 {m}
23.894,8.085,4.05, !- X,Y,Z ==> Vertex
3 {m}
20.149,8.085,4.05; !- X,Y,Z ==> Vertex
4 {m}
BuildingSurface:Detailed,
14kF$qRcj1hQwve7M35$Ce, !- Name
Ceiling,
!- Surface Type
04 | CStone 04 (0.050), !- Construction
Name
Banking
Floor, !-
Zone Name
Surface,
!- Outside Boundary Condition
0j8kFINjv0b9cVEuNR2cdf, !- Outside
Boundary Condition Object
NoSun,
!- Sun Exposure
NoWind,
!- Wind Exposure
Autocalculate,
!- View Factor to Ground
Autocalculate,
!- Number of Vertices
20.149,20.898,4, !- X,Y,Z ==> Vertex 1
{m}
20.149,8.085,4, !- X,Y,Z ==> Vertex 2
{m}
23.894,8.085,4, !- X,Y,Z ==> Vertex 3
{m}
23.894,19.962,4; !- X,Y,Z ==> Vertex 4
{m}
I'm not sure how EnergyPlus handles the "azimuth" for
horizontal
surfaces like these, so I don't know if I need to worry
about this
warning. In either case I'd like to know how to fix it,
though.
Thank you,
Cody Rose
------------------------------------
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message
to
energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that
not everyone has a
high speed connection. Limit attachments to small
files.
EnergyPlus Documentation is searchable. Open
EPlusMainMenu.pdf
under the Documentation link and press the "search"
button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email
to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
__,_._,___
|