[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] EMS Mass Flow Rate



Hello group,
I'm trying to generate a default idf to be simulated with several weathers. This IDF contains an EMS to override the condenser flow rate, I set an variable flow rate. So my EMS sets the flow rate depending on my own rules.
The problem now it is I have a successful IDF for one weather, running without errors but this model doesn't have any autosize field for the pumps, I have filled all the autosize fields.
When I try to set, for example the Rated Flow Rate, to autosize I would need to reference my minimun flow rate, which is set in my EMS code, with a value from a EnergyPlus sensor. For exaple the 10% of the nominal flow rate.
Could someone help me with this issue?
P.S.: I have attached the working IDF and its weather.


__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___
Attachment not found:
d:\eudora\attach\FC-CH-3CND.idf

Attachment not found:
d:\eudora\attach\ESP_Malaga.084820_SWEC.epw