Dear Jean,
Thanks for your help.
Regards,
Alberto Hernandez Neto
De: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] Em nome de Jean marais
Enviada em: terça-feira, 12 de fevereiro de 2013 05:43
Para: EnergyPlus_Support@xxxxxxxxxxxxxxx
Assunto: [EnergyPlus_Support] Re: Coupling solar collector and heat pump
In principle you are asking if one can splice two heaing sources into one system. I believe you can. Just as you can add x2 boilers in parallel on the supply side of the plant loop. You may find that you'll use two waterheating:mixed objects instead of boilers...one for the heat pump source and one for the solar collector source.
They will each in turn be supplied by there own plant loops.
Refer to earlier posts on waterheater:mixed objects.
Jean
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "Alberto Hernandez Neto - USP" wrote:
>
> Dear all,
>
> Could anybody give me a hint if it is possible to couple a solar collector
> and heat pump to simulate a water heating system for residence?
>
> Thanks for any help you can give me.
>
> Regards,
>
> Alberto Hernandez Neto
>
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___