[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Plant Loop System Cycle On/Off Status not working?


I added the "CHILLED WATER PLANT CHILLED WATER LOOP:Plant Loop System Cycle On/Off Status" to output variables but in the csv report file it is always showing 0 for all timesteps. To verify I added "CHILLED WATER PLANT CHILLED WATER LOOP:Plant Loop Cooling Demand" variable and that is working perfectly and shows the correct values. I am facing the same issue with "VAV WITH REHEAT:Air Loop System Cycle On/Off Status". This is also always showing the value as 0 even though all other variables for VAV WITH REHEAT are showing correctly. Are the On/Off Status not expected to work correctly? I am using the Getting Started Tutorials. 

Take care,


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe