Sent from my iPhone
Hi modellers
I am running a model with several zones. It seems to me that there is some component in the heating system that is not responding to the control strategy. The attached graph illustrates the problem (heating not working). Any hint about what may be not working?
graph_heating not working
http://tinypic.com/view.php?pic=beaipx&s=6
This zone is controlled as follows:
----------------------------------------------
SetpointManager:Scheduled,
Air Loop Setpoint Manager, !- Name
Temperature, !- Control Variable
29_deg_heating, !- Schedule Name
Air Loop Supply Side Outlet 2; !- Setpoint Node or NodeList Name
same also applies for the cooling cooling airloop the schedules are always fixed for AllDays at 29 and 14 degress C (heating and cooling outlet air temperature)
------------------------------------------------
AvailabilityManager: Scheduled
these are always on
------------------------------------------------
Schedule:Compact,
always_4, !- Name
Any Number, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: AllDays, !- Field 2
Until: 24:00, !- Field 3
4 ; !- Field 4
Zone temperatures are controlled by a thermostat set to the DUAL setpoint mode
-------------------------------------------------
ThermostatSetpoint:DualSetpoint,
Z11_1_DEPARTURES_LD Dual SP, !- Name
Z11_1_DEPARTURES_LD Heating Setpoint Schedule, !- Heating Setpoint Temperature Schedule Name
Z11_1_DEPARTURES_LD Cooling Setpoint Schedule; !- Cooling Setpoint Temperature Schedule Name
the heating setpoint schedule is the following, 20deg. C and setback at 12deg.C
Z11_1_D
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___