[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Can Eplus process expression as input?



Hi all,

although in Input output reference I found that E+ can take an expressions instead of fixed values, I am not sure my variable fan model does that (what variable should I measure, since fan power consumption is 0 in my case). This is with numbers - I was trying to optimize it using genopt.

Fan:VariableVolume,
    DUPLA FASADA1 Supply Fan,!- Name
    HVACTemplate-Always 1 DSF,  !- Availability Schedule Name
    0.7,                     !- Fan Efficiency
    100,                     !- Pressure Rise {Pa}
    =15*(0-1)*40*8/3600,     !- Maximum Flow Rate {m3/s}
    Fraction,                !- Fan Power Minimum Flow Rate Input Method
    0.1,                     !- Fan Power Minimum Flow Fraction
    0,                       !- Fan Power Minimum Air Flow Rate {m3/s}
    0.9,                     !- Motor Efficiency
    1,                       !- Motor In Airstream Fraction
    0.0015302446,            !- Fan Power Coefficient 1
    0.0052080574,            !- Fan Power Coefficient 2
    1.1086242,               !- Fan Power Coefficient 3
    -.11635563,              !- Fan Power Coefficient 4
    0,                       !- Fan Power Coefficient 5
    DUPLA FASADA1 Mixed Air Outlet,  !- Air Inlet Node Name
    DUPLA FASADA1 Supply Fan Outlet,  !- Air Outlet Node Name
    Ventilator;              !- End-Use Subcategory

Thanks in advance

Marko



------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/