[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: Problem related to electrical heating

Hi James

Thanks for reply. Yeah I did all the work by now by looking all these examples files. I am getting correct values for DHW, Equipments and lighting but there are some issues with Fans and HVAC that I am unable to sort out. My heating is through electricity. 

Thanks

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Jim Dirkes <jim@...> wrote:
>
> Harshul,
> Have you looked at the example files that are included with your E+ installation for a similar system to yours?  These are very helpful.
> 
> James V Dirkes II, PE, BEMP, LEED AP
> www.buildingperformanceteam.com<http://www.buildingperformanceteam.com/>
> Energy Analysis, Commissioning & Training Services
> 1631 Acacia Drive, Grand Rapids, MI 49504 USA
> 616 450 8653
> 
> From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of harshul
> Sent: Monday, March 25, 2013 7:51 PM
> To: EnergyPlus_Support@xxxxxxxxxxxxxxx
> Subject: [EnergyPlus_Support] Re: Problem related to electrical heating
> 
> 
> 
> Hi
> 
> Can someone please help me in this? I will really appreciate.
> 
> Thanks
> 
> --- In EnergyPlus_Support@xxxxxxxxxxxxxxx<mailto:EnergyPlus_Support%40yahoogroups.com>, "harshul" <harshul263@<mailto:harshul263@>> wrote:
> >
> > I am pretty new to e+ and I finally figured out lot of stuff by myself looking at the tutorials and input-output reference. I am sending you my file to you. My doubts are:
> >
> > 1. Do I need to put some nodes or branches too?
> > 2. I am not getting proper heating, cooling and pump values. DHW, equipments and lighting equipment loads seem fine. Can you please have a look? I feel the issue is related to cooling coil setpoint temperarute. Conventionally in eQuest I gave value for cooling coil as 50F and for heating 95F but if I give same value in E+ it says a warning "heating coil temp is more than cooling coil temp" and shows absurd results.
> >
> > Please give your comments and feedback on this. I have also attached project information PDF file along with eQuest model
> > http://tech.groups.yahoo.com/group/EnergyPlus_Support/files/Hybrid%20Systems/
> >
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/