[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] (unknown)





hello, i am a student, and i have a problem.
I modelled my house with two different heating systems: a boiler and a stirling engine. Now I'd like to change the control of the Stirling engine. At the moment the engine has a countinious operation during the heating period and I want to have a intermittent operation (the engine turn off when the temperature is over the set piont temperature). I don't know how to do. I tried to change the value of minimum cooling water flow rate in the object Generator:microCHP:nonNormalizedParamiters. I obtain a intermittent operations but when the electrical output is 0 W, the thermal output is < 0. Then i tried to change the flow rate of the pump, and at the end I try to modell the off with the object availabiltyManegerAssegnementList (as you can see in the E+ file). something is changed, but not all the value of the thermal output is >0.
could you help me?
Thanks, Giacomo


__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___