Téc. Ivan Mezzacapa
Desenhista Projetista de Ar Condicionado / Consultor de Eficiência Energética em Ar Condicionado
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx
Date: Tue, 30 Apr 2013 07:27:00 -0500
Subject: RE: [EnergyPlus_Support] Fatal Error: HotWaterSystem
Ivan,
I think that I would first focus on the highlighted portion below
James V Dirkes II, PE, BEMP, LEED AP
www.buildingperformanceteam.com
Energy Analysis, Commissioning & Training Services
1631 Acacia Drive, Grand Rapids, MI 49504 USA
616 450 8653
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Ivan Mezzacapa
Sent: Tuesday, April 30, 2013 7:32 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: RE: [EnergyPlus_Support] Fatal Error: HotWaterSystem
Sorry, i forget this.
The fatal error is:
** Severe ** GetFirstBranchInletNodeName: BranchList="BOILER_PUMP HW DEMAND SIDE BRANCHES", Branch="BOILER_PUMP HW DEMAND INLET BRANCH" not a valid Branch Name
** Severe ** GetPlant/CondenserLoopData: PlantLoop="BOILER_PUMP HOT WATER LOOP", Invalid condition.
** ~~~ ** The inlet node of the first branch in the Demand Side Branch List Name=BOILER_PUMP HW DEMAND SIDE BRANCHES
** ~~~ ** is not the same as the Demand Side Inlet Node Name=BOILER_PUMP HW DEMAND INLET
** Severe ** GetFirstBranchInletNodeName: BranchList="BOILER_PUMP HW DEMAND SIDE BRANCHES", Branch="BOILER_PUMP HW DEMAND INLET BRANCH" not a valid Branch Name
** ~~~ ** Branch List Inlet Node Name=Invalid Node Name
** ~~~ ** Branches in a BRANCH LIST must be listed in flow order: inlet branch, then parallel branches, then outlet branch.
** Fatal ** GetPlant/CondenserLoopData: Errors found in processing input. Preceding conditions cause termination.
...Summary of Errors that led to program termination:
..... Reference severe error count=5
..... Last severe error=GetFirstBranchInletNodeName: BranchList="BOILER_PUMP HW DEMAND SIDE BRANCHES", Branch="BOILER_PUMP HW DEMAND INLET BRANCH" not a valid Branch Name
************* Warning: Node connection errors not checked - most system input has not been read (see previous warning).
************* Fatal error -- final processing. Program exited before simulations began. See previous error messages.
I don't know why. Thanks for your helpness.
Téc. Ivan Mezzacapa
Desenhista Projetista de Ar Condicionado / Consultor de Eficiência Energética em Ar Condicionado
LinkedIN: http://www.linkedin.com/in/ivanmezzacapa
Celular: (11)9963-9326
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: linda@xxxxxxxxxxxxxx
Date: Mon, 29 Apr 2013 14:16:01 -0600
Subject: Re: [EnergyPlus_Support] Fatal Error: HotWaterSystem
You don't say what the fatal error is.
At 02:13 PM 4/29/2013, Ivan Mezzacapa wrote:
when i use HVAC Template: ChilledWaterLoop and HVAC Template: HotWaterLoop appears one fatal error.
I need to simulate a chilled water system and a heating system to gas, but when I insert the heating system it gives me this fatal error.
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___