[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Maximum Allowable Discomfort Glare Index





Hi, everyone,

I have a question regarding the "Maximum Allowable Discomfort Glare Index"
In my simulation model, I dont have any shading in the window, the glazing used is normal double clear glass. I put the Maximum Allowable Discomfort Glare Index = 22, the Glare Index at Ref Point at certain point is still higher 22.

My questions are

1. Is it true that "Maximum Allowable Discomfort Glare Index" will only be activated when there is window shading?

2. Window without shading, the result of glare from window will not be altered by the input of  "Maximum Allowable Discomfort Glare Index" ?

Thank you very much if any one can answer.

Lam


__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___