[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Heated Floor Control with MAT Thermostat and Nat Vent

Dear Group,
When my windows open very shortly to get some fresh air, the air temperature drops shortly to 10 deg C, but recovers just as fast after the windows are closed again. However, the radiant system controller in real life would not change the mass flow rate of HW so quickly and thus small spikes are effectively ignored.

How can I effect the same insensitive control with the LowTempRad objects, whilst retaining the MAT temperature control mode? I am trying to model "as designed".



Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to: