[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: Control Problems



Regarding this, I am using a furnace heatcool object with the furnace coil switched off follewed by a water coil after the unitary equipment. I see there is a new option to specify the water coil inside the unitary equipment instead of the gas coil. Will this influence better control?

Jean.

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Jean Marais <jeannieboef@...> wrote:
>
> Dear Group,
> I'm having control problems:
> return-->oda_mixing-->fan-->dx_clgcoil-->water_htgcoil
> I'm assigning the same setpoint to the outlet node of both htg and clg
> coils using,
> 
> SetpointManager:SingleZone:Heating,
>     118443 Heating Supply Air Temp Manager,  !- Name
>     Temperature,             !- Control Variable
>     13.,                     !- Minimum Supply Air Temperature {C}
>     31.,                     !- Maximum Supply Air Temperature {C}
>     118443,                  !- Control Zone Name
>     118443 Zone Air Node,    !- Zone Node Name
>     118443 Zone Equip Inlet, !- Zone Inlet Node Name
>     118443 AHU SP for Coil Outlets;  !- Setpoint Node or NodeList Name
> 
> 
> 
> 
> 
> Any advice is appreciated.
> 
> Jean
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/