[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Auto-size and user values
- To: EnergyPlus_Support@xxxxxxxxxxxxxxx
- Subject: [EnergyPlus_Support] Auto-size and user values
- From: "yiolari87" <georgiou.geo13@xxxxxxxxx>
- Date: Tue, 18 Jun 2013 14:20:11 -0000
- Delivered-to: mailing list EnergyPlus_Support@xxxxxxxxxxxxxxx
- Delivery-date: Tue, 18 Jun 2013 08:20:14 -0600
- Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=yahoogroups.com; s=echoe; t=1371565213; bh=yBLmjQxq+HIQ4zMEL2rkpwHUl25ALYSqvDEMthFwloA=; h=Received:Received:X-Yahoo-Newman-Id:X-Sender:X-Apparently-To:X-Received:X-Received:X-Received:X-Received:X-Received:X-Received:To:Message-ID:User-Agent:X-Mailer:X-Originating-IP:X-eGroups-Msg-Info:X-Yahoo-Post-IP:From:X-Yahoo-Profile:Sender:MIME-Version:Mailing-List:Delivered-To:List-Id:Precedence:List-Unsubscribe:Date:Subject:Reply-To:X-Yahoo-Newman-Property:Content-Type:Content-Transfer-Encoding; b=VoO+8AeDj6hmwJbOpHO9eOCemlTt1GlG0NGCHjilTZlOSqKRSPY+7prNjbev6xlYYfif4dz1g+6BhHB9zpaqXDh9SzEfNfPnSIHRA+yLPhUjVqVTzAmhn1PnXxiDjnJ7Nc8ArLm5/6WN4ypi0Dcug9xk+ZbjMKQTR4zJJQHI8/4=
- Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=echoe; d=yahoogroups.com; b=1jxKfzX1wJ5Vt0rsxOaYlxx+o5fmOozMt6gQ/F3+gnISC5e9motfHgi0WyWHBCMeC1fUjKLy3GNeZ3doy0O/YUSnuUboPWSE1+p0BdbBFWfh7btx2JACqahpM0R3JGK3vj3iHbnwgbi9n4VHBNC1Gj22DWUgGAnf3Ir/xM7USEo=;
- Envelope-to: linda@xxxxxxxxxxxxxx
- List-id: <EnergyPlus_Support.yahoogroups.com>
- List-unsubscribe: <mailto:EnergyPlus_Support-unsubscribe@yahoogroups.com>
- Mailing-list: list EnergyPlus_Support@xxxxxxxxxxxxxxx; contact EnergyPlus_Support-owner@xxxxxxxxxxxxxxx
- Reply-to: EnergyPlus_Support@xxxxxxxxxxxxxxx
- Sender: EnergyPlus_Support@xxxxxxxxxxxxxxx
- User-agent: eGroups-EW/0.82
Dear Group,
I was wondering how a user can simulate a system based on actual sizing parameters, avoiding the implementation of auto-sizing during a simulation. Particularly, as I read in documentation and try to apply, a HVAC system can not be simulated without auto-sizing.
However, for my case as I will need to make changes on the building envelope I need to run simulations without changing the parameters of the system for each individual simulation case (The system is auto-sized on the particular changes that I made on the building envelope).
So, does anybody know how can I avoid the auto-size part of the simulation and thus, run an actual system for my simulations.
Thank you in advance for any response to my message
George G.
------------------------------------
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/