[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Re: design builder inter block partition
- To: EnergyPlus_Support@xxxxxxxxxxxxxxx
- Subject: [EnergyPlus_Support] Re: design builder inter block partition
- From: "elisa88.ribi" <elisa88.ribi@xxxxxxxxx>
- Date: Mon, 24 Jun 2013 10:18:29 -0000
- Delivered-to: mailing list EnergyPlus_Support@xxxxxxxxxxxxxxx
- Delivery-date: Mon, 24 Jun 2013 04:42:06 -0600
- Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=yahoogroups.com; s=echoe; t=1372070522; bh=mBLTeGR6mv09PTxFO6WCW+yqdFV7saLo3XK39krecdg=; h=Received:Received:X-Yahoo-Newman-Id:X-Sender:X-Apparently-To:X-Received:X-Received:X-Received:X-Received:X-Received:X-Received:To:Message-ID:User-Agent:X-Mailer:X-Originating-IP:X-eGroups-Msg-Info:X-Yahoo-Post-IP:From:X-Yahoo-Profile:Sender:MIME-Version:Mailing-List:Delivered-To:List-Id:Precedence:List-Unsubscribe:Date:Subject:Reply-To:X-Yahoo-Newman-Property:Content-Type:Content-Transfer-Encoding; b=B5RZOVEyB8YSmZAIlcSZ9IE56RNEKaPQycaQEE6wJfcsWLv36LGWUv0wkCHNNKYBP6OVw75POmP/sXdd9XIEjiEzlxcmj5Xz0kLfpMqpLW7HNpXdBJooUjzDo+wsFn003nyVk+DExe+VXvbliJkT22y+qYBYqgWbqD01RAMNVtQ=
- Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=echoe; d=yahoogroups.com; b=wGR2uFHnRi1Mx8Ms2qUiyFvBFxUuXGYa2ySMvEGfTDORaDQvEfLSD87lJ2GPISqqbQcnRFbTlqammqz3ZB0/+4+3A8FsnNkM03ui+sGEVR7l11VrAD1CqVmDC6Vf8s73u22HqQU5MFICOQI4/D4aYfo3x5ezt5J/CXVI3j8nvQg=;
- Envelope-to: linda@xxxxxxxxxxxxxx
- List-id: <EnergyPlus_Support.yahoogroups.com>
- List-unsubscribe: <mailto:EnergyPlus_Support-unsubscribe@yahoogroups.com>
- Mailing-list: list EnergyPlus_Support@xxxxxxxxxxxxxxx; contact EnergyPlus_Support-owner@xxxxxxxxxxxxxxx
- Reply-to: EnergyPlus_Support@xxxxxxxxxxxxxxx
- Sender: EnergyPlus_Support@xxxxxxxxxxxxxxx
- User-agent: eGroups-EW/0.82
I noticed that this is correct for the output surface temperature, but for the output -opaque surface inside face conduction- the simulation give me two diffent values, whether I insert one code or another.
Why?
Which one should I consider??
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Linda Lawrie <linda@...> wrote:
>
> If that is an interzone partition (fyi, EnergyPlus did not define it
> -- DesignBuilder defined those for EnergyPlus), then the inside
> surface temperature of one is the one that the partition "belongs" to
> and its outside surface temperature is the temperature of the surface
> in the adjacent zone and vice versa.
>
> At 01:51 AM 6/11/2013, elisa88.ribi wrote:
> >E+ for the same partition define 2 different code name, es:
> >P_85227_7_0_0 and P_87034_27_0_10037, I do not know which one to use
> >to get output: surface inside temperature and surface outside temperature
>
------------------------------------
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/